ALX series continuous powder mill change the original mill discharge structure, can according to user requirements in a variety of ways to adjust the partical machine for coarse, medium and fine or ultrafine grinding, can deal with all kinds of hardness of the material. Suitable for silicate products, new building material, refractory material, quartz sand, pottery and porcelain uranium, black and non-ferrous metal, etc
ALX series continuous powder mill could adopt stainless steel, hard alloy, polyurethane, alumina, manganese steel and other linings and could be equipped with frequency control system according to the users’ requirement.

specifications and models	barrel rotate speed（r/min）	Ball capacity(t)	Feeding Granularity (mm)	Discharging Granularity (mm)	Output (t/h)	Motor power(kw)
Ф900×1800	36～38	1.5	≤20	0.075-0.89	0.65-2	18.5
Ф900×3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22
Ф1200×2400	36	3	≤25	0.075-0.6	1.5-4.8	30
Ф1200×3000	36	3.5	≤25	0.074-0.4	1.6-5	37
Ф1200×4500	32.4	5	≤25	0.074-0.4	1.6-5.8	55
Ф1500×3000	29.7	7.5	≤25	0.074-0.4	2-5	75
Ф1500×4500	27	11	≤25	0.074-0.4	3-6	110
Ф1500×5700	28	12	≤25	0.074-0.4	3.5-6	130
Ф1830×3000	25.4	11	≤25	0.074-0.4	4-10	130
Ф1830×4500	25.4	15	≤25	0.074-0.4	4.5-12	155
Ф1830×6400	24.1	21	≤25	0.074-0.4	6.5-15	210
Ф1830×7000	24.1	23	≤25	0.074-0.4	7.5-17	245
Ф2100×3000	23.7	15	≤25	0.074-0.4	6.5-36	155
Ф2100×4500	23.7	24	≤25	0.074-0.4	8-43	245
Ф2100×7000	23.7	26	≤25	0.074-0.4	8-48	280
Ф2200×4500	21.5	27	≤25	0.074-0.4	9-45	280
Ф2200×6500	21.7	35	≤25	0.074-0.4	14-26	380
Ф2200×7000	21.7	35	≤25	0.074-0.4	15-28	380
Ф2200×7500	21.7	35	≤25	0.074-0.4	15-30	380
Ф2400×3000	21	23	≤25	0.074-0.4	7-50	245
Ф2400×4500	21	30	≤25	0.074-0.4	8.5-60	320
Ф2700×4000	20.7	40	≤25	0.074-0.4	12-80	400